<del id="sge2u"></del>
|
公司基本資料信息
|
|||||||||||||||||||||||||||||
FT-100E多功能粉末堆密度儀
FT-100E Multi-functional powder heap densimeter (upgrade version)
1. 概述Outline：
頻率和振次數字顯示，并可以任意調節；配備自動計算功能和打印機系統，具有密碼設定功能，存儲功能，平均值計算功能，能打印出測試時間（年月日時分秒）質量、體積、振實密度值，平均值及測試編號等數據功能；同時具備振動次數和振動時間兩種測量模式；通過量筒測試松裝密度，可以獲得豪斯納比.
Digital display Frequency and vibration number, and can be adjusted arbitrarily;Equipped with automatic calculation function and printer system, Has set the password function, storage function, the average value calculation function, Can print out data functions such as the test time year/month/day/hour/ minute/ second) ,mass, volume and tap density value, average value and test serial numbe so on; There are two kinds of measurement modes: vibration frequency and vibration time. Using measuring cylinder test the apparent density, then you can obtain the Hausner ratio.
二、適用范圍scope of application：
本品主要適用于粉末和顆粒物科研院所、大專院校對測試要求和測試數據要求精準之單位使用；也用于廣大生產企業對粉末和顆粒性狀分析，成本管控作用。
This product is suitable for the use of precise units in powder and particle research institutes and colleges and universities for testing requirements and test data.It is also used for the analysis of powder and particle character, and the cost control effect.
三、標準Standard：
符合USP（美國藥典）、BP （英國藥典）和EP（歐洲藥典）的規范要求，儀器含蓋國標GB/T 5162-2006/ISO3953:1993中的各項指標，與國際上通用檢測方法相通。
In accordance with USP (the United States pharmacopoeia), BP (British pharmacopoeia) and EP (European pharmacopoeia) specification requirements, Equipment covers all index in the national standard GB/T 5162-2006 / ISO3953: 1993, Similar to the international test method.
2. 技術參數明細 Technical parameters
|
功能項目project/model |
技術參數明細 Technical parameters |
||
|
3. 測試工位數（選購） Test station number （Buy） |
1個one |
2個two |
3個three |
|
1. 測試數據處理方式 Test data processing method |
帶打印，自動計算，平均值計算 · With print, automatic calculation, average value calculation |
||
|
3.量筒配置規格The measuring cylinder configuration specification |
25ml、50ml、100ml、250ml
|
||
|
4.振幅range of vibration |
*大Max 14mm，整數integer 1-14mm； |
||
|
5. 測量模式measurement |
振次和時間兩種測量方式 Vibration and time measurements |
||
|
密度density |
0-9.9999g/cm3 |
||
|
5.振動頻率vibrational frequency |
0～300 次/分times/ minute數顯digital display |
||
|
6.振動時間time of vibration |
0-9999s數顯digital display |
||
|
7.符合標準meet the standards
|
USP（美國藥典）、BP （英國藥典）和EP（歐洲藥典）的規范； Standard of USP (us pharmacopoeia), BP (British pharmacopoeia) and EP (European pharmacopoeia); |
||
|
4. 量筒要求 Measuring cylinder requirements |
容積Volume 100±1.0ml，刻度部分高H 175±10mm *小刻度間的容積1ml volume of the minimum scale is 1ml 容積Volume 25±0.5ml刻度部分高H 135±7mm。 *小刻度間容積為0.2cm，測量精度為±0.1cm volume of the minimum scale is 0.2 cm and the measurement accuracy ±0.1cm |
||
|
9．重復性repeatability |
誤差Deviation：≤1% |
||
|
10.準確性Accuracy |
誤差Deviation：≤1% |
||
|
5. 流動指數Flow index
|
豪斯納比Hausner ratio：堆密度/松裝密度獲得 Heap density/bulk density acquisition |
||
|
6. 適用范圍 · Scope of application
|
制藥、食品、化工、電池、磨料、科研院所、及大中專院校、企業研發、質量管控等 · Pharmaceutical, food, chemical, battery, abrasive, research institute, and major technical colleges, r&d, quality control, etc |
||
|
13.電源Power supply |
交流AC 220V(50Hz/60Hz)、40W |
||
|
14.使用環境 · Operational environment
|
濕度小于85%，無凝結現象，無煙塵，無機械振動源或電磁干擾源 Humidity is less than 85%, no condensation, no smoke, no mechanical vibration source or electromagnetic interference source |
||
|
選購項目 Buy items |
a.2Q驗證文件 b.隔音箱 c.外接通訊稱重天平 d.水分儀 e.粉體真密度儀 f.松裝密度儀 a.2Q verification file b. sound box c. External communication weighing balance d. moisture meter e. powder true density meter f. bulk density meter |
||
點擊圖片查看原圖
