YMJ-1350型圓壓圓滾壓模切機

YMJ-1350型圓壓圓滾壓模切機的特點：圓壓圓模切機機械結構緊湊、操作簡單、調整方便、性能先進、生產效率高，使紙箱生產行業加工高檔紙箱的理想換代機型。

YMJ-1350 round pssure round rolling die cutting machine is a new type of production equipment in the production of carton machinery in recent years. Rotary die cutting machine main function is the printed piece box slotting, corner cutting, trimming, drilling and other a multi-channel processes die-cutting equipment.

YMJ-1350 round pssure characteristics of the rolling cylinder die-cutting machine, rotary die-cutting machine machine has the advantages of compact structure, simple operation, convenient adjustment, advanced performance, production efficiency is high, the carton industry production and processing high-grade cardboard ideal replacement models.

YMJ-1350型圓壓圓滾壓模切機用途與特點：

1、輥筒為優質鋼材，平衡校正，鍍硬鉻。

2、軟膜自動修復機構，可修復膠墊3-4次，提高膠墊使用壽命。

3、膠墊選用進口優力膠套膜（臺灣、美國進口產品供客戶選配）模切次數可達800-1000萬次。

4、整機采用光、電、氣（液壓），聯合控制，安全有效，可一次完成開槽，切角、分紙、壓線、打扣手等多種工藝，特別適合對異形紙箱的加工。

5、線速度自動補償機構，當軟輥直徑改變時，線速度進行自動補償，*保*了對每一批紙箱模切尺寸完全一致。

6、上軟輥通過機械或液壓控制橫向微量擺蕩，擺蕩往復距離40cm，以緩解模套磨損程度，且不影響模切質量。

7、刀模版相位調整行星齒輪機構，周向360度電動或手動調整.（運行、停機均可、數字式輸入）。

8、當刀無紙板通過時，下模切輥自動落下，避免模切刀與軟模套接觸，減少兩者磨損。

The application and characteristics of YMJ-1350 round rolling die cutting machine:

1, balance correction roller are made of high quality steel, hard chromium plating.

Automatic repair mechanism 2, soft, can repair the rubber pad 3-4, improve the service life of the rubber pad.

3, rubber pad used imported Youli rubber sleeve film (Taiwan, the United States imported products for customers select) cutting times of up to 800-1000 million times.

4, the machine with light, electricity, gas (hydraulic), joint control, safe and effective, can be a time slot, cutting angle, paper, creasing, play the hand clasping, such as a variety of process, which is particularly suitable for the processing of special-shaped carton.

5, line speed automatic compensation mechanism, when the soft roll diameter change, the line speed for automatic compensation, to ensure that the size of each batch of cardboard boxes are completely consistent.

6, soft and by mechanical or hydraulic control horizontal trace swing, swinging reciprocating distance of 40cm, to ease the die sleeve wear degree, and does not affect the die-cutting quality.

7, the knife template phase adjustment planetary gear mechanism, the week to 360 degrees electric or manual adjustment.

8, when the knife without the board, the lower die cutting roller automatically falls, to avoid contact with the die cutting knife and soft mold sets, reducing both wear and tear.

YMJ-1350型圓壓圓滾壓模切機技術參數：