耐*電鍍油墨，電鍍耐*油墨
油墨特性：
主要用于工電鍍、電鍍表面．金屬．玻璃等材料上，具有高色澤、高色彩、高遮蓋力、高穩定性、耐*及耐磨擦之特點。
印刷：絲印移印均可。
表干及實干時間：表干時間自然揮發1-5分鐘；實干時間在12小時以內。
稀釋及清洗：UVK1(移印**)。
測試方法(完全干燥后)：
1、3m膠紙粘在畫有百格的油墨表面，45度角迅速拉起不脫油;
2、純度99%的工業*，一千克砝碼用棉布包住在油墨表面，以水平力來回拉200次無脫色;
3、 耐磨：橡皮擦500g力水平來回擦500次。
使用方法：
1、使用前應充分攪拌，用后隨時封閉；
2、攪拌時加**10-15%，稀釋到印刷粘度；
3、網板塞網時可用洗網水清洗；
4、不得與其它類型油墨混合使用。
注意事項：
1、塑膠材料的外觀相似，但可能會是不同的材料，客戶需試印確定其符合要求后，再批量印刷；
2、在移印過程中，如出現拉絲或散開，可適當加入一些慢干膏即可;
3、環境溫度過高，將會影響油墨原有質量；
4、根據氣候變化，請遠離火源，陰暗環境下存放。Ink characteristics:
It is mainly used for electroplating and electroplating surfaces. metal, glass and other materials are characterized by high color, high color, high covering power, high stability, alcohol resistance and abrasion resistance.
Printing: silk printing can be printed.
Dry and dry time: the drying time naturally volatilized for 1-5 minutes; the actual drying time was within 12 hours.
Dilution and cleaning: UVK1 (transfer).
Test method (after complete drying):
1, 3M adhesive paper is stuck on the surface of the printing ink, and the 45 degree angle is quickly pulled up and the oil is not removed.
2, the purity of 99% of the industrial alcohol, one kilogram weight of cotton cloth bags live on the surface of ink, with horizontal force back and forth to pull 200 times without decolorization;
3, wear resistance: eraser 500g force level back and forth 500 times.
Usage method：
1. It should be fully stirred before use and closed at any time after use.
2, when mixing, add **10-15%, dilute to the printing viscosity;
3, net board plug can be washed by washing net water.
4, not to be mixed with other types of ink.
Matters needing attention：
1, the appearance of the plastic material is similar, but it may be different materials. The customer needs to try to print the material after it meets the requirements.
2, in the process of transfer printing, such as drawing or dispersing, can appropriately add some slow dry paste;
3, the high temperature of the environment will affect the original quality of the ink.
4. According to the climate change, please keep away from the fire source and keep it under the dark environment.
點擊圖片查看原圖
