HZ/680 全自動軟管灌裝封尾機

HZ/680

全自動軟管灌裝封尾機

Plastic Tube Filling And Sealing Machine Key  Features

特點：

適用于塑料軟管，復合軟管及鋁管包裝。

供管→洗管→對標→灌裝→加熱→封尾（印碼）→切尾→排管全部自動完成。組合式管座，切換簡單，清洗方便，灌裝量準確，調量簡單。

功能：

適用于塑料軟管，復合軟管及鋁管包裝。供管→洗管→對標→灌裝→加熱→封尾（印碼）→切尾→排管全部自動完成。組合式管座，切換簡單、方便。切換一般只需10分鐘。組合式灌裝部，拆裝簡單，清洗方便。灌裝量準確，調量簡單。上升式灌裝，防止產生氣泡現象。切斷式灌裝頭，防止拉絲現象。采用設計精密的加熱頭，熱熔軟管內壁后封尾。單面或雙面印碼皆可以。整機采用全不銹鋼制造、清潔、衛生。

Features：

Tube feeding，cleaning，Mark-catching，filling，heating，sealing（coding），cutting can be done auto-matically.（PE＆Laminate tube）Change-over for different diameters of tube goes fast and simply within 10 minutes.Different types of filling nozzle for different materials in insure the precise volume and cleaning.Simple and easy filling amount adjustment.Filling nozzle is descended into tube during filling for debubbling.precise hot air nozzle and cooling system makes anti-leakage sealing.hopper is connected with sanitary clamp so that it is easy to clean，disassemble and assemble.date coding at both side of the tubes.

l 安全裝置 safety device

l 超負荷保護裝置 over-load protection device

l 無管不灌裝 no tube，no filling

l 緊急停止 emergency stop device

l 安全門 safety door

l 無壓縮空氣無運作 no operation without compressed air

本機技術參數（Main Technical Data）

灌裝范圍filling range 5-250（充填杠體、活塞交換式）grams（filling cylinder/piston should be changed depends on filling amount）

灌裝速度working capacity            30-60管/分鐘tubes/min

管徑diameter                        10-50MM

軟管長度max                         230MMMax length:230mm（option：60tube）

灌裝精度accuracy                    ±0.1-0.5％（以100g為基準）（based on 100grams）

加熱器heater                        3000W

電源power                           220/280V/8KW/3相phase

氣壓compressed air                  4-5kgf/cm2 7001/min or more

料斗容量hopper capacity            40Liter（可根據用戶要求制作changes can be made according to the specification）

外形尺寸dimensions                  850（寬W）*1250（長L）*2000(高H)MM

機器重量weight about                  800KG