AXE頻率信號轉換器TMF-3DD

總代理：臺灣AXE頻率信號轉換器TMF-3DD
輸入：0～10KHZ(80KHZ)
輸出：DC0～10V
主要規格：SPECIFICATION
● Measuring accuracy : 0.03% F.S. (23 ± 5℃)
( 精 _ 度 )
● Count input type : Switch selectable current souring(NPN)
( }波入型式 ) or current sinking (PNP)
● Count input trigger levels : HI bias (CMOS) (VIH=7.5V, VIL=5.5V)
( }波|l位 ) LO bias (TTL) (VIH=3.7V, VIL=2.0V)
● Sampling time : 20 cycles/sec. (>10Hz)
( 取rg ) f/2 cycles/sec. (<10Hz)
● Analog output resolution : 15 bit DAC
( 比出解析度 )
● Response time : < 250 ms (0-90%)(>10Hz)
( 出反速度 )
● Output drive capability : < 10mA for voltage mode
( 出d能力 ) < 10V for current mode
● Output ripple (p-p) : < 0.1% F.S.
( 出之i波 )
● Zero (offset) range : 0- ± 9999 Digit adjustable
( w零{整 )
● Span (scale) range : 0- ± 9999 Digit adjustable
( *大值{整 )
● Sensor power supply : 12VDC ± 3% (<50mA)
( 感器源 )
● Temp. coefficient : 50ppm/℃ (0-50℃)
( 囟S )
● Display : Red high efficiency LEDs high 10.16mm (0.4")
( @示幕)
● Isolation : Input/Output/Power/Case
( 隔x特性 )
● Parameter setting : Touch switches
( 翟O(shè)定方式 )
● Memory mode : Non-volatile E2 PROM memory
(方式 )
● Insulation Resistance : >100M ohm with 500V DC
( ^阻抗 )
● Dielectric strength : 2KVac/1 min. (input/output/power)
( ^耐耗芰 ) 1600Vdc (input/output)
● Operating condition : 0-50℃(20 to 90% RH non-condensed)
( 使用h境l件 )
● Storage condition : 0-70℃(20 to 90% RH non-condensed)
( 存放h境l件 )
● Construction : Socket/plugin type with barrier terminals
( 安b方式 )